Hobby Hangar

Products

• 5509889 LI-PO REGULATOR 6.0 VOLT (5 AMP)

  

  * This Cunning little unit allows the use of any battery from 7 to 25
  * volts to run your RX flight pack
  * Input Voltage - 7v to 25v
  * Output Regulated Voltage - 6.0v
  * Output Amps - 5A
  * Weight - 19g
  * Size - 20x15x49mm

  £8.69 inc. V.A.T.

• 5509888 LI-PO REGULATOR 4.8 VOLT (5 AMP)

  

  * This Cunning little unit allows the use of any battery from 6 to 25
  * volts to run your RX flight pack
  * Input Voltage - 6v to 25v
  * Output Regulated Voltage - 4.8v
  * Output Amps - 5A
  * Weight - 19g
  * Size - 20x14x49mm

  £8.15 inc. V.A.T.

• Tornado XQ UBEC #1

  

  # Tornado XQ UBEC. 1)Input voltage 5.5v - 28v, 2 - 6S lipo
  # 2)Dual output voltage 4.8v & 6v (swap jumper)
  # 3)Output current 3A (5A max)
  # 4)Low-voltage protection
  # 5)Overheating protection
  # 6)High efficiency and voltage stability
  # 7)1Strong anti-interference capability plus ferrite ring
  # 8)Weight 11g
  # 9)Size 46 x 17 x 7mm

  £7.99 inc. V.A.T.

• VR6010 Voltage Regulator 10A, 6V

  

  For current hungry applications as in large scale models that utilise multiple high current-draw servos, the VR6010 provides an ideal solution to managing voltage supply. Providing a continuous 6 volt 10 amp supply the VR6010 can be used to step down supply to power the on board radio system from high capacity 2-cell LiPos or 5 to 8 cell Ni-MH packs.
  
  A single VR6010 regulator provides 10 amps continuous current (16 amp peaks) making it ideal for most high-current draw applications, but for heavy duty applications two VR6010’s can be used to provide 20 amps continuous and up to 32 amps peak power.
  
  The VR6010 is fitted with EC3 connectors and is ideally suited used singularly or as a pair in conjunction with Spetrum’s AR9100 series PowerSafe receiver.
  
  Key Features
  
  * Brings higher voltage packs within the operating limits of most servos
  * Delivers a steady 6 volts ensuring consistent performance throughout the discharge cycle of the battery
  * Includes a fail-on switch and 16-gauge heavy duty input and output wires with EC3 connectors
  * Drop in addition for the AR9100
  * Cooling fan provides additional current handling capability
  Convenient mounting lugs
  
  Specifications
  Type: 10 amp linear voltage regulator
  Voltage input: 6 to 10 volts (5 to 8 cell NiCd/ NiMh or 2-cell LiPo)
  Output voltage: 6.0 volts
  Continuous current: 10 amps
  Peak current: 16 amps
  Dimensions LxWxH: 40x30x30 mm (less mounting tabs)
  Weight: 50 grams/ 1.8oz

  £52.15 inc. V.A.T.